To determine the fineness of cements, pozzolanas and other powdery materials, various international specifications recommend the use of "specific area" method. In the instrument described below, air permeability method is used to determine the specific surface as total surface area in cm2/g of material.
The is a complete laboratory simulator to generate and study accelerated Alkali Silica and Alkali Aggregate reactivity in concrete samples.
Blaine apparatus is used to determine the fineness of cement. Ask supply Automatic Blaine Apparatus in two models one with inbuilt data recording and control system & the second one with PC based data recording and onboard control system.
Application: Preparation of standard prisms with Automatic/Manual mixing procedure in accordance with IS:10890, EN 196-1 & EN 196-3. This apparatus has specially been designed to prepare cement mortar for strength determination as specified in IS:4031.
A Bomb Calorimeter is a type of constant-volume calorimeter used in measuring the heat of combustion of a particular reaction. Bomb Calorimeter is used to determine the Calorific Value of Coal and other kinds of solid and liquid fuels.
The necessary and sufficient analysis software for Dynamic Pile Load Testing.Forces and velocities occurring at the pile top during ram impact are complementary quantities related to each other by pile characteristics and soil resistance.
The CDF-/CIF test set-up enables the freeze-thaw test to be carried out in accordance with CDF recommendations from RILEM. With this test procedure, the weathered quantity of a surface is measured by a number of freeze-thaw cycles.
The Laboratory Cement Autoclave is suitable for conducting accelerated soundness tests on Cement or the Autoclave expansion test. The equipment consists of a Stainless Steel Pressure Vessel with insulated outer shell, fabricated out of high quality Stainless Steel Sheet.
This Cement Tensile Testing Machine is primarily used to determine the tensile strength of briquette specimens of cement. It can also be used to test the flexure strength of the sample. This test is commonly used by Cement Manufacturers in order to determine the quality of cement.
Claisse LeNeo fusion instrument prepares glass disks for XRF as well as borate and peroxide solutions for AA & ICP analysis.
This jig assembly is designed for the compression testing of 40 x 40 x 160 mm mortar prisms after breaking in Flexural Jig Assembly. The frame is fitted with a spherical ball seating assembly to which is attached the upper platen.
Resipod is a fully integrated 4-point Wenner probe, designed to measure the electrical resistivity of concrete in a completely non-destructive test. It is the most accurate instrument available, extremely fast and stable and packaged in a robust, waterproof housing designed to operate in a demanding site environment.