Resipod is a fully integrated 4-point Wenner probe, designed to measure the electrical resistivity of concrete in a completely non-destructive test. It is the most accurate instrument available, extremely fast and stable and packaged in a robust, waterproof housing designed to operate in a demanding site environment.

An easy to use gauge that quickly and accurately locates/orientates reinforcement bars in concrete and measures the depth of cover over the rebar. The same system, when coupled with a Half Cell such as Copper-Copper Sulphate or Silver Silver Chloride, can act as a Corrosion Measuring Instrument. The instrument is very compact, easy to use and comes with Covermaster software for accurate analysis.

Impact Echo measure the thickness of concrete plates and slabs according to ASTM Standard C 1383-98a. They can also measure the depth of surface-opening cracks and determine the location, depth and extent of cracks, voids, delaminations, honeycombing and debonding in plain and reinforced structures.

This product has been design to the following European Directives: Directive 2002/95/EC on the Restriction of the Use of certain Hazardous Substances in Electrical and Electronic Equipment (RoHS). Directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE) Low Voltage Directive (LVD) 73/23/EEC CE Marking Directive 93/68/EEC EMC Directive 89/336/EEC.

The Torrent air permeability tester allows a completely non destructive test of the covercrete quality on site as described in the Swiss standard SIA 262/1. A measurement of the concrete permeability with Proceq’s permeability tester Torrent takes 2 to 12 minutes. The permeability data can be analyzed easily afterwards from the instrument's display.

The Profometer Corrosion is the most versatile corrosion analysis solution in the market based on the half-cell method. Proceq’s unique wheel electrodes allow the fastest and most efficient on-site testing. As direct successor to the Canin, it is compatible with existing Canin and most third party electrodes.

Profometer 600 Series is for precise and non-destructive measurement of concrete cover and rebar diameters and the detection of rebar locations using the eddy current principle with the pulse induction method. A rebar detector with real-time visualization of the rebars beneath the instrument to locate rebars & measure concrete cover.

The quality of concrete repairs is determined by the adhesive strength between the repair material and the substrate. Pull-off testing is the most widely used test method to assess bond strength. The Proceq DY-2 family of automated pull-off testers covers the complete range of pull-off applications with unmatched ease of operation and the ability to store a complete record of the test.

UPV investigates the structural Integrity for a wide range of materials; like concrete, refractories, ceramics, timber etc. UPV can be used in the laboratory or on site to investigate uniformity; cavities; cracks; fire/frost damage; delamination; deterioration.

It is world’s most widely used instrument for non-destructive estimation of concrete strength properties, standardized in every major region. Not limited to concrete it is also used for rock, paper and mortar.

A mobile app that lets you annotate measurements with voice, photos and comments. Generate reports and share them instantly. Access your data from anywhere, anytime. Accurately test the widest range of concrete strength classes.