Accutom-100 is a precision table top cut-off machine and grinding machine for precise and deformation-free cutting. Equipped with sample rotation or oscillation. Pre-set constant feed speed in the range of 0.005 - 3.00 mm/s.

CitoVac is a vacuum impregnation equipment for mounting. CitoVac gives you superior impregnation, carried out quickly and efficiently.

A Hydraulic Press Pallet System is been widely used as sample preparation accessory for Elemental Analysis and Phase analysis like XRF and XRD.

LaboPol-30 is a strong grinding and polishing machine for 300 mm diameter discs. With variable speed from 50-500 rpm, it is possible to carry out grinding, lapping and polishing processes, including final polishing with oxide polishing suspensions.

Secotom-20 is ideal for single cuts on a variety of workpieces that require small changes to the clamping setup and the cut-off wheel position. Secotom-60 is ideal for cuts on a variety of workpieces that require changes to the clamping setup and cut-off wheel position.

Secotom-6 is ideal for single cuts on standard workpieces with minimal changes between jobs. With features such as an 8.0 mm T-slot table unit, a touchpad and a turn/push knob, and one stored method.

Grinding/polishing machine with variable speed (40-600 rpm in steps of 10 rpm).For disk 200 mm (8.0") dia. 370 W motor. Complete with control box with electric parts and controls for rack mounting outside the enclosed cell. Discs are ordered separately.

Heavy duty and rugged Vibratory Cup Mill(VCM) with Hydraulic opening and closing of cover incorporated with safety mechanism, that VCM will not start once the cover is not closed.