Electra is a 2D and 3D electrical tomography and induced potential measuring instrument with high Signal amplification and digitization performed where the signal is produced (i.e. at the electrodes) and this allows higher data quality and extremely low current intensity in the soil, minimizing power requirements and artefactual polarizations.
POLARES brings together into a single small and lightweight case the management and control system and the power section, the only external part is the signal switching system, so to offer the a great flexibility with Available configurations: from 16 to 256 electrodes.
Elerec-2 is a two channel High efficeincy microprocessor based receiver for IP measurement (includes Resistivity), with 1micro Volt resolution and 0,3% accuracy and for Chargeability 1mV/V resolution and 1% accuracy.
The ELREC Lite low-weight hand-held IP & Resistivity receiver has been designed for high productivity surveys, with 2 simultaneous measurement channels. Its automatic synchronization process let it work without any link with the transmitter.
Elerec-PRO is a TEN channel High efficeincy microprocessor based receiver for IP measurement (includes Resistivity), with 1micro Volt resolution and 0.2% accuracy and for Chargeability 0.6% accuracy.
ELREC-T is a versatile Resistivity and Time Domain Induced Polarization system. It has both Transreceiver as well only receiver mode for IP survey.
I-Full Waiver is a Logger for electrical signal designed for advanced Time Domain Induced Polarization, Resistivity and SP continuos measurements.
The McOHM Profiler-4 is a multi-channel digital resistivity meter. It has switching functions for 32 electrodes and four (4) receiver circuits with high resolution 24 bit delta sigma type A/D converters.
RM1 is a compact versatile earth resistivity meter with 24 bit data acquisition. All parameters in “stand alone” mode can easily be set using the console keyboard, even in harsh environmental conditions; connect the RM1 to your laptop via the dedicated acquisition software, and use the taylor-made measuring session (VES/ERT) to organize your in-field sessions quickly and efficiently.
It is Multi-channel (2-channel standard, optional more channels) compact Resistivity Imaging suyystem for Resistivity, IP & SP measurements. It has in-built switching for 48 multi-electrodes with 5meter/10meter or more spacings take-out cable reverssible type, for 1D, 2D & 3D measurementsIt is with inbuilt Transmitter, Receiver, powered by internal battery for compelete operation and current injection.
It is Multi-channel (2-channel standard, optional more channels) compact Resistivity Imaging suyystem for Resistivity, IP & SP measurements. It has in-built switching for 72 multi-electrodes with 5meter/10meter or more spacings take-out cable reverssible type, for 1D, 2D & 3D measurementsIt is with inbuilt Transmitter, Receiver, powered by internal battery for compelete operation and current injection.
It is Multi-channel (2-channel) compact Resistivity meter with IP & SP measurements. It is with inbuilt Transmitter, Receiver, powered by internal battery for compelete operation and current injection. It's output Voltage is 400V, 800Vpeak to peak, 100 Watts Power, 1250 milli Ampere Curent output, automatic fixing of output voltage in relation with level of measured signal, Internal memory, 0.5% accuracy, 1µV Voltage precission, data repeatability, quality control through standard deviation and automatic stacking./p>